Abstract

We describe a method to achromatize a Wollaston prism beam splitter by combining it with a polarization grating. The advantage of this technique, compared to refractive methods of correction, is that only one type of birefringent crystal is needed. Additionally, the assembly can be made thinner while remaining achromatized. In this Letter, a model for the achromatized grating prism is formulated. Experimental validation is conducted by achromatizing a calcite Wollaston prism (apex angle of 5.35°) using a polarization grating with a spatial period of 253 μm. We found that the primary dispersion was reduced by approximately 6.5 times for wavelengths spanning the conventional $F$, $d$, and $C$ Fraunhofer lines (486 to 656 nm).

© 2016 Optical Society of America

Achromatization of Wollaston polarizing beam splitters

Gerald Wong, Roger Pilkington, and Andrew R. Harvey
Opt. Lett. 36(8) 1332-1334 (2011)

Manipulation of beat length and wavelength dependence of a polarization beam splitter using a subwavelength grating

Lu Liu, Qingzhong Deng, and Zhiping Zhou
Opt. Lett. 41(21) 5126-5129 (2016)

Compact and high extinction ratio polarization beam splitter using subwavelength grating couplers

Yin Xu and Jinbiao Xiao
Opt. Lett. 41(4) 773-776 (2016)

Single Beam Schlieren Interferometer Using a Wollaston Prism

R. D. Small, V. A. Sernas, and R. H. Page
Appl. Opt. 11(4) 858-862 (1972)

Wollaston prism as a beam splitter in convergent light

J. M. Simon and M. C. Simon
Appl. Opt. 17(21) 3352-3353 (1978)